MicroCorruption/21-Cold Lake/manual.txt
2022-12-11 15:32:46 -06:00

48 lines
1.6 KiB
Plaintext

Lockitall LOCKIT 2 r A.01
______________________________________________________________________
User Manual: Lockitall LockIT 2, rev a.01
______________________________________________________________________
OVERVIEW
- Lockitall is under new management.
- The lock has been put together from bits of leftover scrap from
the old factory.
DETAILS
The LockIT 2 A.02 is the second of a new series of locks. It is
controlled by a MSP430 microcontroller. The MSP430 is a very low-
power device, chosen because we found several crates of old stock.
This lock only accepts biometric and NFC inputs, and does not have
a traditional password prompt.
To support rapid development cycles this lock accepts a program
from the old password input prompt. The program must be signed by
Lockitall, so engineering aren't concerned it will be used
maliciously. There are two programs, one of which is below in hex
format and is used in the factory to test proper lock operation.
The other program, not reproduced here, is restricted and only
available internally at Lockitall.
Load address:
8000
Program text:
3540088000450545054505450545054505450f433041
Signature:
8605e027f42368ea6bba9de66409f6a8ddedcd49614a4648281c47a7b4ad252f5639069b17ba8ff104d371e2d8a625b038f0750667364087e7987e40ea81510f
This is Hardware Version Beta.
This is Software Revision 02.
(c) 2021 LOCKITALL Page 1/1