v0.3.0: Total overhaul
- Everything has been rewritten - Modularity is improved somewhat - No dependency injection in preprocessor/parser, though - There are now early and late constant evaluation engines - This engine allows for by-value access to already-assembled code - Performs basic math operations, remainder, bitwise logic, bit shifts, negation, and bit inversion - Also allows for indexing into already-generated code using pointer-arithmetic syntax: `*(&main + 10)`. This is subject to change? It's clunky, and only allows word-aligned access. However, this rewrite is taking far too long, so I'll call the bikeshedding here. - Pretty sure this constant evaluation is computationally equivalent to Deadfish?
This commit is contained in:
@@ -1,222 +1,224 @@
|
||||
//! TODO: rewrite for v0.3.0
|
||||
use super::*;
|
||||
|
||||
/// Creates a [Parsable] implementation for an enum whose variants
|
||||
/// are named after other [Parsable] items
|
||||
macro make_parsable($(#[$meta:meta])* $vis:vis enum $id:ident {$($(#[$vmeta:meta])*$v:ident),*$(,)?}) {
|
||||
$( #[$meta] )* $vis enum $id {$($(#[$vmeta])*$v($v),)* }
|
||||
impl ::msp430_asm::parser::parsable::Parsable for $id {
|
||||
fn parse<'text, T>(p: &Parser, stream: &mut T) -> Result<Self, ParseError>
|
||||
where T: TokenStream<'text> {
|
||||
$(if let Some(v) = Parsable::try_parse(p, stream)? { Ok(Self::$v(v)) } else )*
|
||||
{ Err(ParseError::UnrecognizedDirective("".into())) }
|
||||
}
|
||||
}
|
||||
impl TryFrom<&str> for $id {
|
||||
type Error = ParseError;
|
||||
fn try_from(value: &str) -> Result<Self, Self::Error> {
|
||||
Parsable::parse(&Parser::default(), &mut Tokenizer::new(value).ignore(Type::Space).preprocessed())
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
make_parsable! {
|
||||
#[derive(Debug)]
|
||||
pub enum SyntaxFragment {
|
||||
Opcode,
|
||||
PrimaryOperand,
|
||||
Number,
|
||||
}
|
||||
}
|
||||
// /// Creates a [Parsable] implementation for an enum whose variants
|
||||
// /// are named after other [Parsable] items
|
||||
// macro make_parsable($(#[$meta:meta])* $vis:vis enum $id:ident {$($(#[$vmeta:meta])*$v:ident),*$(,)?}) {
|
||||
// $( #[$meta] )* $vis enum $id {$($(#[$vmeta])*$v($v),)* }
|
||||
// impl ::msp430_asm::parser::parsable::Parsable for $id {
|
||||
// fn parse<'text, T>(p: &Parser, stream: &mut T) -> Result<Self, ParseError>
|
||||
// where T: TokenStream<'text> {
|
||||
// $(if let Some(v) = Parsable::try_parse(p, stream)? { Ok(Self::$v(v)) } else )*
|
||||
// { Err(ParseError::UnrecognizedDirective("".into())) }
|
||||
// }
|
||||
// }
|
||||
// impl TryFrom<&str> for $id {
|
||||
// type Error = ParseError;
|
||||
// fn try_from(value: &str) -> Result<Self, Self::Error> {
|
||||
// Parsable::parse(&Parser::default(), &mut Tokenizer::new(value).ignore(Type::Space).preprocessed())
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
|
||||
impl SyntaxFragment {
|
||||
pub fn info(&self) {
|
||||
match self {
|
||||
SyntaxFragment::Opcode(o) => Self::opcode_info(o),
|
||||
SyntaxFragment::PrimaryOperand(o) => Self::operand_info(o),
|
||||
SyntaxFragment::Number(n) => println!("The number {n}"),
|
||||
}
|
||||
}
|
||||
fn opcode_info(o: &Opcode) {
|
||||
let (desc, as_rust) = usage(o);
|
||||
println!("Usage: {o}{}\n{desc} ( {as_rust} )", params(o));
|
||||
footer!("https://mspgcc.sourceforge.net/manual/x223.html");
|
||||
}
|
||||
// TODO: re-enable full instruction decoding
|
||||
// fn encoding_info(e: &Encoding) {
|
||||
// match e {
|
||||
// Encoding::Single { dst, .. } => Self::operand_info(dst),
|
||||
// Encoding::Jump { target } => println!("Jumps to (pc + {target})"),
|
||||
// Encoding::Double { src, dst, .. } => {
|
||||
// Self::operand_info(src);
|
||||
// Self::operand_info(&dst.clone().into())
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
fn operand_info(o: &PrimaryOperand) {
|
||||
match o {
|
||||
PrimaryOperand::Direct(r) => Self::register_info(r),
|
||||
PrimaryOperand::Indirect(r) => {
|
||||
Self::register_info(r);
|
||||
println!("Indirect addressing mode: use data pointed to by {r}");
|
||||
}
|
||||
PrimaryOperand::PostInc(r) => {
|
||||
Self::register_info(r);
|
||||
println!("Indirect post-increment mode: use data pointed to by {r}, then increment {r}");
|
||||
}
|
||||
PrimaryOperand::Indexed(r, n) => {
|
||||
Self::register_info(r);
|
||||
println!("Indexed mode: use the data at {r}[{n}]");
|
||||
}
|
||||
PrimaryOperand::Relative(_) => return,
|
||||
PrimaryOperand::Absolute(n) => println!("Absolute mode: use the data at absolute address {n}"),
|
||||
PrimaryOperand::Immediate(n) => println!("Immediate mode: the constant {n}"),
|
||||
PrimaryOperand::Four => println!("#4 mode: Immediate 4 is encoded @sr"),
|
||||
PrimaryOperand::Eight => println!("#8 mode: Immediate 8 is encoded @sr+"),
|
||||
PrimaryOperand::Zero => println!("#0 mode: Immediate 0 is encoded cg (r3)"),
|
||||
PrimaryOperand::One => println!("#1 mode: Immediate 1 is encoded _(cg), where _ is a nonexistent ext-word"),
|
||||
PrimaryOperand::Two => println!("#2 mode: Immediate 2 is encoded @cg"),
|
||||
PrimaryOperand::MinusOne => println!("#-1 mode: the all-ones constant, is encoded @cg+"),
|
||||
}
|
||||
footer!("https://mspgcc.sourceforge.net/manual/x82.html");
|
||||
}
|
||||
fn register_info(r: &Register) {
|
||||
use Register as Re;
|
||||
match r {
|
||||
Re::pc => println!("pc (r0) is the Program Counter. Post-increment addressing will increase it by 2."),
|
||||
Re::sp => println!("sp (r1) is the Stack Pointer. Post-increment addressing will increase it by 2."),
|
||||
Re::sr => println!(
|
||||
"sr (r2) is the Status Register. It has arithmetic flags: oVerflow, Negative, Zero, and Carry;\nInterrupt Enable; and toggles for various clock/sleep functions.\n8\t7\t6\t5\t4\t3\t2\t1\t0\nV\tSCG1\tSCG1\tOSCOFF\tCPUOFF\tGIE\tN\tZ\tC",
|
||||
),
|
||||
Re::cg => println!("cg (r3) is the Constant Generator. It's hard-wired to zero."),
|
||||
Re::r4 | Re::r5 | Re::r6 | Re::r7 | Re::r8 | Re::r9 | Re::r10 | Re::r11 => {
|
||||
println!("{r} is a callee-saved general purpose register.")
|
||||
}
|
||||
Re::r12 | Re::r13 | Re::r14 | Re::r15 => {
|
||||
println!("{r} is a caller-saved general purpose register, allowed for return values.")
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
// make_parsable! {
|
||||
// #[derive(Debug)]
|
||||
// pub enum SyntaxFragment {
|
||||
// Opcode,
|
||||
// PrimaryOperand,
|
||||
// Number,
|
||||
// }
|
||||
// }
|
||||
|
||||
// Gets parameter usage information from the opcode's EncodingParser
|
||||
pub fn params(opcode: &Opcode) -> &'static str {
|
||||
match opcode.resolve().1 {
|
||||
EncodingParser::Jump { target: None } => " target (relative address or label)",
|
||||
EncodingParser::Single { width: None, dst: None } => "[.b] dst",
|
||||
EncodingParser::Single { dst: None, .. } => " dst",
|
||||
EncodingParser::Double { src: None, dst: None, .. } => "[.b] src, dst",
|
||||
EncodingParser::Double { src: None, .. } => "[.b] src",
|
||||
EncodingParser::Double { dst: None, .. } => "[.b] dst",
|
||||
EncodingParser::Double { .. } => "[.b]",
|
||||
EncodingParser::Reflexive { reg: None, .. } => "[.b] dst",
|
||||
_ => "",
|
||||
}
|
||||
}
|
||||
// impl SyntaxFragment {
|
||||
// pub fn info(&self) {
|
||||
// match self {
|
||||
// SyntaxFragment::Opcode(o) => Self::opcode_info(o),
|
||||
// SyntaxFragment::PrimaryOperand(o) => Self::operand_info(o),
|
||||
// SyntaxFragment::Number(n) => println!("The number {n}"),
|
||||
// }
|
||||
// }
|
||||
// fn opcode_info(o: &Opcode) {
|
||||
// let (desc, as_rust) = usage(o);
|
||||
// println!("Usage: {o}{}\n{desc} ( {as_rust} )", params(o));
|
||||
// footer!("https://mspgcc.sourceforge.net/manual/x223.html");
|
||||
// }
|
||||
// // TODO: re-enable full instruction decoding
|
||||
// // fn encoding_info(e: &Encoding) {
|
||||
// // match e {
|
||||
// // Encoding::Single { dst, .. } => Self::operand_info(dst),
|
||||
// // Encoding::Jump { target } => println!("Jumps to (pc + {target})"),
|
||||
// // Encoding::Double { src, dst, .. } => {
|
||||
// // Self::operand_info(src);
|
||||
// // Self::operand_info(&dst.clone().into())
|
||||
// // }
|
||||
// // }
|
||||
// // }
|
||||
// fn operand_info(o: &PrimaryOperand) {
|
||||
// match o {
|
||||
// PrimaryOperand::Direct(r) => Self::register_info(r),
|
||||
// PrimaryOperand::Indirect(r) => {
|
||||
// Self::register_info(r);
|
||||
// println!("Indirect addressing mode: use data pointed to by {r}");
|
||||
// }
|
||||
// PrimaryOperand::PostInc(r) => {
|
||||
// Self::register_info(r);
|
||||
// println!("Indirect post-increment mode: use data pointed to by {r}, then increment {r}");
|
||||
// }
|
||||
// PrimaryOperand::Indexed(r, n) => {
|
||||
// Self::register_info(r);
|
||||
// println!("Indexed mode: use the data at {r}[{n}]");
|
||||
// }
|
||||
// PrimaryOperand::Relative(_) => return,
|
||||
// PrimaryOperand::Absolute(n) => println!("Absolute mode: use the data at absolute address {n}"),
|
||||
// PrimaryOperand::Immediate(n) => println!("Immediate mode: the constant {n}"),
|
||||
// PrimaryOperand::Four => println!("#4 mode: Immediate 4 is encoded @sr"),
|
||||
// PrimaryOperand::Eight => println!("#8 mode: Immediate 8 is encoded @sr+"),
|
||||
// PrimaryOperand::Zero => println!("#0 mode: Immediate 0 is encoded cg (r3)"),
|
||||
// PrimaryOperand::One => println!("#1 mode: Immediate 1 is encoded _(cg), where _ is a nonexistent ext-word"),
|
||||
// PrimaryOperand::Two => println!("#2 mode: Immediate 2 is encoded @cg"),
|
||||
// PrimaryOperand::MinusOne => println!("#-1 mode: the all-ones constant, is encoded @cg+"),
|
||||
// }
|
||||
// footer!("https://mspgcc.sourceforge.net/manual/x82.html");
|
||||
// }
|
||||
// fn register_info(r: &Register) {
|
||||
// use Register as Re;
|
||||
// match r {
|
||||
// Re::pc => println!("pc (r0) is the Program Counter. Post-increment addressing will increase it by 2."),
|
||||
// Re::sp => println!("sp (r1) is the Stack Pointer. Post-increment addressing will increase it by 2."),
|
||||
// Re::sr => println!(
|
||||
// "sr (r2) is the Status Register. It has arithmetic flags: oVerflow, Negative, Zero, and Carry;\nInterrupt Enable; and toggles for various clock/sleep functions.\n8\t7\t6\t5\t4\t3\t2\t1\t0\nV\tSCG1\tSCG1\tOSCOFF\tCPUOFF\tGIE\tN\tZ\tC",
|
||||
// ),
|
||||
// Re::cg => println!("cg (r3) is the Constant Generator. It's hard-wired to zero."),
|
||||
// Re::r4 | Re::r5 | Re::r6 | Re::r7 | Re::r8 | Re::r9 | Re::r10 | Re::r11 => {
|
||||
// println!("{r} is a callee-saved general purpose register.")
|
||||
// }
|
||||
// Re::r12 | Re::r13 | Re::r14 | Re::r15 => {
|
||||
// println!("{r} is a caller-saved general purpose register, allowed for return values.")
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
|
||||
pub fn usage(opcode: &Opcode) -> (&'static str, &'static str) {
|
||||
match opcode {
|
||||
// Single
|
||||
Opcode::Rrc => ("Rotates dst right, through carry flag", "dst = (dst >> 1) | (sr[C] << 15)"),
|
||||
Opcode::Swpb => ("Swaps the high and low byte of dst", "dst.swap_bytes()"),
|
||||
Opcode::Rra => ("Shifts dst right, sign-extending the result", "dst >>= 1"),
|
||||
Opcode::Sxt => ("Sign-extends the 8-bit dst to 16-bits", "dst as i16 << 8 >> 8"),
|
||||
Opcode::Push => ("Pushes dst to the stack", "stack.push(dst)"),
|
||||
Opcode::Call => ("Calls a subroutine at an absolute address", "dst()"),
|
||||
Opcode::Reti => ("Return from interrupt handler", "{ sr = stack.pop(); pc = stack.pop() }"),
|
||||
// Jump
|
||||
Opcode::Jnz => ("Jump if the last result was not zero", "if !Z { pc += target }"),
|
||||
Opcode::Jz => ("Jump if the last result was zero", "if Z { pc += target }"),
|
||||
Opcode::Jnc => ("Jump if the last operation did not carry", "if !C { pc += target }"),
|
||||
Opcode::Jc => ("Jump if the last operation produced a carry bit", "if C { pc += target }"),
|
||||
Opcode::Jn => ("Jump if the last result was negative", "if N { pc += target }"),
|
||||
Opcode::Jge => ("Jump if the flags indicate src >= dst", "if sr[C] == sr[V] { pc += target }"),
|
||||
Opcode::Jl => ("Jump if the flags indicate src < dst", "if sr[C] != sr[V] { pc += target }"),
|
||||
Opcode::Jmp => ("Jump unconditionally", "pc += target"),
|
||||
// Double
|
||||
Opcode::Mov => ("Copy src into dst", "dst = src"),
|
||||
Opcode::Add => ("Add src to dst", "dst += src"),
|
||||
Opcode::Addc => ("Add src to dst with carry", "dst += src + sr[C]"),
|
||||
Opcode::Subc => ("Subtract src from dst with carry", "dst -= src - sr[C]"),
|
||||
Opcode::Sub => ("Subtract src from dst", "dst -= src"),
|
||||
Opcode::Cmp => ("Subtract src from dst, but discard the result, keeping the flags", "dst - src"),
|
||||
Opcode::Dadd => ("Add src to dst in Binary Coded Decimal", "dst = dst as BCD + src as BCD"),
|
||||
Opcode::Bit => ("Test if bits in src are set in dst", "(src & dst).cmp(0)"),
|
||||
Opcode::Bic => ("Clear bits in dst that are set in src, without changing flags", "dst &= !src"),
|
||||
Opcode::Bis => ("Set bits in dst that are set in src, without changing flags", "dst |= src"),
|
||||
Opcode::Xor => ("Bitwise Xor src into dst", "dst ^= src"),
|
||||
Opcode::And => ("Bitwise And src into dst", "dst &= src"),
|
||||
// Emulated
|
||||
Opcode::Nop => ("Does nothing", "{}"),
|
||||
Opcode::Pop => ("Pops a value from the stack", "dst = stack.pop()"),
|
||||
Opcode::Br => ("Branches to the absolute address in src", "pc = src"),
|
||||
Opcode::Ret => ("Returns from subroutine", "pc = stack.pop()"),
|
||||
Opcode::Clrc => ("Clears the carry flag", "sr[C] = 0"),
|
||||
Opcode::Setc => ("Sets the carry flag", "sr[C] = 1"),
|
||||
Opcode::Clrz => ("Clears the zero flag", "sr[Z] = 0"),
|
||||
Opcode::Setz => ("Sets the zero flag", "sr[Z] = 1"),
|
||||
Opcode::Clrn => ("Clears the negative flag", "sr[N] = 0"),
|
||||
Opcode::Setn => ("Sets the negative flag", "sr[N] = 1"),
|
||||
Opcode::Dint => ("Disables interrupts", "sr[GIE] = 0"),
|
||||
Opcode::Eint => ("Enables interrupts", "sr[GIE] = 1"),
|
||||
Opcode::Rla => ("Shifts dst to the left, padding with zeros", "dst <<= 1"),
|
||||
Opcode::Rlc => ("Rotates dst to the left, through carry flag", "dst = (dst << 1) + sr[C]"),
|
||||
Opcode::Inv => ("Inverts the bits in dst", "dst = !dst"),
|
||||
Opcode::Clr => ("Sets dst to 0", "dst = 0"),
|
||||
Opcode::Tst => ("Sets the status register flags (CNZV) using dst", ""),
|
||||
Opcode::Dec => ("Decrements dst", "dst -= 1"),
|
||||
Opcode::Decd => ("Decrements dst by 2 (one processor word)", "dst -= 2"),
|
||||
Opcode::Inc => ("Increments dst", "dst += 1"),
|
||||
Opcode::Incd => ("Increments dst by 2 (one processor word)", "dst += 2"),
|
||||
Opcode::Adc => ("Adds the carry bit to dst", "dst += sr[C]"),
|
||||
Opcode::Dadc => ("Adds the carry bit to dst, in Binary Coded Decimal", "dst as BCD = sr[C]"),
|
||||
Opcode::Sbc => ("Subtracts the carry bit from dst", "dst -= sr[C]"),
|
||||
}
|
||||
}
|
||||
// // Gets parameter usage information from the opcode's EncodingParser
|
||||
// pub fn params(opcode: &Opcode) -> &'static str {
|
||||
// match opcode.resolve().1 {
|
||||
// EncodingParser::Jump { target: None } => " target (relative address or label)",
|
||||
// EncodingParser::Single { width: None, dst: None } => "[.b] dst",
|
||||
// EncodingParser::Single { dst: None, .. } => " dst",
|
||||
// EncodingParser::Double { src: None, dst: None, .. } => "[.b] src, dst",
|
||||
// EncodingParser::Double { src: None, .. } => "[.b] src",
|
||||
// EncodingParser::Double { dst: None, .. } => "[.b] dst",
|
||||
// EncodingParser::Double { .. } => "[.b]",
|
||||
// EncodingParser::Reflexive { reg: None, .. } => "[.b] dst",
|
||||
// _ => "",
|
||||
// }
|
||||
// }
|
||||
|
||||
const SINGLE: [Opcode; 7] =
|
||||
[Opcode::Rrc, Opcode::Swpb, Opcode::Rra, Opcode::Sxt, Opcode::Push, Opcode::Call, Opcode::Reti];
|
||||
// pub fn usage(opcode: &Opcode) -> (&'static str, &'static str) {
|
||||
// match opcode {
|
||||
// // Single
|
||||
// Opcode::Rrc => ("Rotates dst right, through carry flag", "dst = (dst >> 1) | (sr[C] << 15)"),
|
||||
// Opcode::Swpb => ("Swaps the high and low byte of dst", "dst.swap_bytes()"),
|
||||
// Opcode::Rra => ("Shifts dst right, sign-extending the result", "dst >>= 1"),
|
||||
// Opcode::Sxt => ("Sign-extends the 8-bit dst to 16-bits", "dst as i16 << 8 >> 8"),
|
||||
// Opcode::Push => ("Pushes dst to the stack", "stack.push(dst)"),
|
||||
// Opcode::Call => ("Calls a subroutine at an absolute address", "dst()"),
|
||||
// Opcode::Reti => ("Return from interrupt handler", "{ sr = stack.pop(); pc = stack.pop() }"),
|
||||
// // Jump
|
||||
// Opcode::Jnz => ("Jump if the last result was not zero", "if !Z { pc += target }"),
|
||||
// Opcode::Jz => ("Jump if the last result was zero", "if Z { pc += target }"),
|
||||
// Opcode::Jnc => ("Jump if the last operation did not carry", "if !C { pc += target }"),
|
||||
// Opcode::Jc => ("Jump if the last operation produced a carry bit", "if C { pc += target }"),
|
||||
// Opcode::Jn => ("Jump if the last result was negative", "if N { pc += target }"),
|
||||
// Opcode::Jge => ("Jump if the flags indicate src >= dst", "if sr[C] == sr[V] { pc += target }"),
|
||||
// Opcode::Jl => ("Jump if the flags indicate src < dst", "if sr[C] != sr[V] { pc += target }"),
|
||||
// Opcode::Jmp => ("Jump unconditionally", "pc += target"),
|
||||
// // Double
|
||||
// Opcode::Mov => ("Copy src into dst", "dst = src"),
|
||||
// Opcode::Add => ("Add src to dst", "dst += src"),
|
||||
// Opcode::Addc => ("Add src to dst with carry", "dst += src + sr[C]"),
|
||||
// Opcode::Subc => ("Subtract src from dst with carry", "dst -= src - sr[C]"),
|
||||
// Opcode::Sub => ("Subtract src from dst", "dst -= src"),
|
||||
// Opcode::Cmp => ("Subtract src from dst, but discard the result, keeping the flags", "dst - src"),
|
||||
// Opcode::Dadd => ("Add src to dst in Binary Coded Decimal", "dst = dst as BCD + src as BCD"),
|
||||
// Opcode::Bit => ("Test if bits in src are set in dst", "(src & dst).cmp(0)"),
|
||||
// Opcode::Bic => ("Clear bits in dst that are set in src, without changing flags", "dst &= !src"),
|
||||
// Opcode::Bis => ("Set bits in dst that are set in src, without changing flags", "dst |= src"),
|
||||
// Opcode::Xor => ("Bitwise Xor src into dst", "dst ^= src"),
|
||||
// Opcode::And => ("Bitwise And src into dst", "dst &= src"),
|
||||
// // Emulated
|
||||
// Opcode::Nop => ("Does nothing", "{}"),
|
||||
// Opcode::Pop => ("Pops a value from the stack", "dst = stack.pop()"),
|
||||
// Opcode::Br => ("Branches to the absolute address in src", "pc = src"),
|
||||
// Opcode::Ret => ("Returns from subroutine", "pc = stack.pop()"),
|
||||
// Opcode::Clrc => ("Clears the carry flag", "sr[C] = 0"),
|
||||
// Opcode::Setc => ("Sets the carry flag", "sr[C] = 1"),
|
||||
// Opcode::Clrz => ("Clears the zero flag", "sr[Z] = 0"),
|
||||
// Opcode::Setz => ("Sets the zero flag", "sr[Z] = 1"),
|
||||
// Opcode::Clrn => ("Clears the negative flag", "sr[N] = 0"),
|
||||
// Opcode::Setn => ("Sets the negative flag", "sr[N] = 1"),
|
||||
// Opcode::Dint => ("Disables interrupts", "sr[GIE] = 0"),
|
||||
// Opcode::Eint => ("Enables interrupts", "sr[GIE] = 1"),
|
||||
// Opcode::Rla => ("Shifts dst to the left, padding with zeros", "dst <<= 1"),
|
||||
// Opcode::Rlc => ("Rotates dst to the left, through carry flag", "dst = (dst << 1) + sr[C]"),
|
||||
// Opcode::Inv => ("Inverts the bits in dst", "dst = !dst"),
|
||||
// Opcode::Clr => ("Sets dst to 0", "dst = 0"),
|
||||
// Opcode::Tst => ("Sets the status register flags (CNZV) using dst", ""),
|
||||
// Opcode::Dec => ("Decrements dst", "dst -= 1"),
|
||||
// Opcode::Decd => ("Decrements dst by 2 (one processor word)", "dst -= 2"),
|
||||
// Opcode::Inc => ("Increments dst", "dst += 1"),
|
||||
// Opcode::Incd => ("Increments dst by 2 (one processor word)", "dst += 2"),
|
||||
// Opcode::Adc => ("Adds the carry bit to dst", "dst += sr[C]"),
|
||||
// Opcode::Dadc => ("Adds the carry bit to dst, in Binary Coded Decimal", "dst as BCD = sr[C]"),
|
||||
// Opcode::Sbc => ("Subtracts the carry bit from dst", "dst -= sr[C]"),
|
||||
// }
|
||||
// }
|
||||
|
||||
const JUMP: [Opcode; 8] =
|
||||
[Opcode::Jnz, Opcode::Jz, Opcode::Jnc, Opcode::Jc, Opcode::Jn, Opcode::Jge, Opcode::Jl, Opcode::Jmp];
|
||||
// const SINGLE: [Opcode; 7] =
|
||||
// [Opcode::Rrc, Opcode::Swpb, Opcode::Rra, Opcode::Sxt, Opcode::Push, Opcode::Call, Opcode::Reti];
|
||||
|
||||
#[rustfmt::skip]
|
||||
const DOUBLE: [Opcode; 12] = [
|
||||
Opcode::Mov, Opcode::Add, Opcode::Addc, Opcode::Subc, Opcode::Sub, Opcode::Cmp,
|
||||
Opcode::Dadd, Opcode::Bit, Opcode::Bic, Opcode::Bis, Opcode::Xor, Opcode::And,
|
||||
];
|
||||
#[rustfmt::skip]
|
||||
const SIMULATED: [Opcode; 24] = [
|
||||
Opcode::Nop, Opcode::Pop, Opcode::Br, Opcode::Ret, Opcode::Clrc, Opcode::Setc,
|
||||
Opcode::Clrz, Opcode::Setz, Opcode::Clrn, Opcode::Setn, Opcode::Dint, Opcode::Eint,
|
||||
Opcode::Rla, Opcode::Rlc, Opcode::Inv, Opcode::Clr, Opcode::Tst, Opcode::Dec,
|
||||
Opcode::Decd, Opcode::Inc, Opcode::Incd, Opcode::Adc, Opcode::Dadc, Opcode::Sbc,
|
||||
];
|
||||
// const JUMP: [Opcode; 8] =
|
||||
// [Opcode::Jnz, Opcode::Jz, Opcode::Jnc, Opcode::Jc, Opcode::Jn, Opcode::Jge, Opcode::Jl, Opcode::Jmp];
|
||||
|
||||
pub fn list_opcodes() {
|
||||
let mut stdout = std::io::stdout().lock();
|
||||
header!(stdout, "Single-operand instructions:");
|
||||
let _ = write_opcode_list(&mut stdout, &SINGLE);
|
||||
header!(stdout, "Relative Jump instructions:");
|
||||
let _ = write_opcode_list(&mut stdout, &JUMP);
|
||||
header!(stdout, "Double-operand instructions:");
|
||||
let _ = write_opcode_list(&mut stdout, &DOUBLE);
|
||||
header!(stdout, "Simulated instructions:");
|
||||
let _ = write_opcode_list(&mut stdout, &SIMULATED);
|
||||
}
|
||||
// #[rustfmt::skip]
|
||||
// const DOUBLE: [Opcode; 12] = [
|
||||
// Opcode::Mov, Opcode::Add, Opcode::Addc, Opcode::Subc, Opcode::Sub, Opcode::Cmp,
|
||||
// Opcode::Dadd, Opcode::Bit, Opcode::Bic, Opcode::Bis, Opcode::Xor, Opcode::And,
|
||||
// ];
|
||||
// #[rustfmt::skip]
|
||||
// const SIMULATED: [Opcode; 24] = [
|
||||
// Opcode::Nop, Opcode::Pop, Opcode::Br, Opcode::Ret, Opcode::Clrc, Opcode::Setc,
|
||||
// Opcode::Clrz, Opcode::Setz, Opcode::Clrn, Opcode::Setn, Opcode::Dint, Opcode::Eint,
|
||||
// Opcode::Rla, Opcode::Rlc, Opcode::Inv, Opcode::Clr, Opcode::Tst, Opcode::Dec,
|
||||
// Opcode::Decd, Opcode::Inc, Opcode::Incd, Opcode::Adc, Opcode::Dadc, Opcode::Sbc,
|
||||
// ];
|
||||
|
||||
fn write_opcode_list(mut f: impl std::io::Write, list: &[Opcode]) -> std::io::Result<()> {
|
||||
for (idx, opcode) in list.iter().enumerate() {
|
||||
write!(f, "{opcode}{}", if idx % 6 == 5 { "\n" } else { "\t" })?;
|
||||
}
|
||||
if list.len() % 6 != 0 {
|
||||
writeln!(f)?;
|
||||
}
|
||||
Ok(())
|
||||
}
|
||||
// pub fn list_opcodes() {
|
||||
// let mut stdout = std::io::stdout().lock();
|
||||
// header!(stdout, "Single-operand instructions:");
|
||||
// let _ = write_opcode_list(&mut stdout, &SINGLE);
|
||||
// header!(stdout, "Relative Jump instructions:");
|
||||
// let _ = write_opcode_list(&mut stdout, &JUMP);
|
||||
// header!(stdout, "Double-operand instructions:");
|
||||
// let _ = write_opcode_list(&mut stdout, &DOUBLE);
|
||||
// header!(stdout, "Simulated instructions:");
|
||||
// let _ = write_opcode_list(&mut stdout, &SIMULATED);
|
||||
// }
|
||||
|
||||
macro header ($f:ident, $($x: expr),+) {
|
||||
{write!($f, "{}",SetForegroundColor(Color::Cyan)).ok();write!($f, $($x),+).ok();writeln!($f, "{}",ResetAttributes).ok();}
|
||||
}
|
||||
macro footer ($($x: expr),+) {
|
||||
{print!("{}",SetForegroundColor(Color::DarkGray));print!($($x),+);println!("{}",ResetAttributes);}
|
||||
}
|
||||
// fn write_opcode_list(mut f: impl std::io::Write, list: &[Opcode]) -> std::io::Result<()> {
|
||||
// for (idx, opcode) in list.iter().enumerate() {
|
||||
// write!(f, "{opcode}{}", if idx % 6 == 5 { "\n" } else { "\t" })?;
|
||||
// }
|
||||
// if list.len() % 6 != 0 {
|
||||
// writeln!(f)?;
|
||||
// }
|
||||
// Ok(())
|
||||
// }
|
||||
|
||||
// macro header ($f:ident, $($x: expr),+) {
|
||||
// {write!($f, "{}",SetForegroundColor(Color::Cyan)).ok();write!($f, $($x),+).ok();writeln!($f, "{}",ResetAttributes).ok();}
|
||||
// }
|
||||
// macro footer ($($x: expr),+) {
|
||||
// {print!("{}",SetForegroundColor(Color::DarkGray));print!($($x),+);println!("{}",ResetAttributes);}
|
||||
// }
|
||||
|
||||
@@ -3,59 +3,63 @@
|
||||
// https://mspgcc.sourceforge.net/manual/ln16.html
|
||||
#![feature(decl_macro)]
|
||||
|
||||
use anes::{Color, ResetAttributes, SetForegroundColor};
|
||||
use msp430_asm::parser::preamble::*;
|
||||
use msp430_asm::preamble::*;
|
||||
use std::{
|
||||
error::Error,
|
||||
io::{stdin, IsTerminal, Write},
|
||||
};
|
||||
|
||||
type AsmResult<T> = Result<T, Box<dyn Error>>;
|
||||
|
||||
mod data;
|
||||
|
||||
fn main() -> AsmResult<()> {
|
||||
if stdin().is_terminal() {
|
||||
hello();
|
||||
}
|
||||
repl()
|
||||
fn main() {
|
||||
println!("Hello, world!")
|
||||
}
|
||||
|
||||
fn hello() {
|
||||
println!(
|
||||
"{}{} v{}
|
||||
This software contains instruction and register descriptions adapted from
|
||||
the mspgcc project's fantastic documentation, which is licensed under the GPL.
|
||||
https://mspgcc.sourceforge.net/manual/book1.html{}\n",
|
||||
SetForegroundColor(Color::DarkGray),
|
||||
env!("CARGO_BIN_NAME"),
|
||||
env!("CARGO_PKG_VERSION"),
|
||||
ResetAttributes
|
||||
);
|
||||
}
|
||||
// use anes::{Color, ResetAttributes, SetForegroundColor};
|
||||
// use msp430_asm::parser::preamble::*;
|
||||
// use msp430_asm::preamble::*;
|
||||
// use std::{
|
||||
// error::Error,
|
||||
// io::{stdin, IsTerminal, Write},
|
||||
// };
|
||||
|
||||
fn repl() -> AsmResult<()> {
|
||||
printflush!("> ");
|
||||
let mut line = String::new();
|
||||
while let Ok(len) = stdin().read_line(&mut line) {
|
||||
match len {
|
||||
0 => break, // No newline (reached EOF)
|
||||
1 => (), // Line is empty
|
||||
_ => {
|
||||
if line.starts_with('?') || line.starts_with("help") {
|
||||
data::list_opcodes()
|
||||
} else if let Ok(sf) = data::SyntaxFragment::try_from(line.as_str()) {
|
||||
sf.info();
|
||||
}
|
||||
}
|
||||
}
|
||||
printflush!("> ");
|
||||
line.clear();
|
||||
}
|
||||
Ok(())
|
||||
}
|
||||
// type AsmResult<T> = Result<T, Box<dyn Error>>;
|
||||
|
||||
macro printflush ($($x: expr),+) {
|
||||
{print!($($x),+); let _ = ::std::io::stdout().flush();}
|
||||
}
|
||||
// mod data;
|
||||
|
||||
// fn main() -> AsmResult<()> {
|
||||
// if stdin().is_terminal() {
|
||||
// hello();
|
||||
// }
|
||||
// repl()
|
||||
// }
|
||||
|
||||
// fn hello() {
|
||||
// println!(
|
||||
// "{}{} v{}
|
||||
// This software contains instruction and register descriptions adapted from
|
||||
// the mspgcc project's fantastic documentation, which is licensed under the GPL.
|
||||
// https://mspgcc.sourceforge.net/manual/book1.html{}\n",
|
||||
// SetForegroundColor(Color::DarkGray),
|
||||
// env!("CARGO_BIN_NAME"),
|
||||
// env!("CARGO_PKG_VERSION"),
|
||||
// ResetAttributes
|
||||
// );
|
||||
// }
|
||||
|
||||
// fn repl() -> AsmResult<()> {
|
||||
// printflush!("> ");
|
||||
// let mut line = String::new();
|
||||
// while let Ok(len) = stdin().read_line(&mut line) {
|
||||
// match len {
|
||||
// 0 => break, // No newline (reached EOF)
|
||||
// 1 => (), // Line is empty
|
||||
// _ => {
|
||||
// if line.starts_with('?') || line.starts_with("help") {
|
||||
// data::list_opcodes()
|
||||
// } else if let Ok(sf) = data::SyntaxFragment::try_from(line.as_str()) {
|
||||
// sf.info();
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
// printflush!("> ");
|
||||
// line.clear();
|
||||
// }
|
||||
// Ok(())
|
||||
// }
|
||||
|
||||
// macro printflush ($($x: expr),+) {
|
||||
// {print!($($x),+); let _ = ::std::io::stdout().flush();}
|
||||
// }
|
||||
|
||||
Reference in New Issue
Block a user